Metal Gearmotor
1.Integrated motor and gearbox in a compact frame, simple and quick to install
2.Broad output speed range with high torque capacity to meet varying load demands
3. Precision gear transmission for low noise operation, superior sealing and high transmission efficiency
4.Reliable and stable performance under continuous duty, with extended service life and wide application versatility
5.Multiple shaft types, output configurations and mounting arrangements available to suit different installation requirements
· Equipped with built-in braking mechanism that applies holding force immediately upon motor stop
· Rapid stopping performance with a controlled overrun of only 5–6 rotations, ensuring precise positioning
· Supports instant forward/reverse switching for applications requiring frequent directional changes
· Compact and space-saving design without compromising on power output
General Specification：
|
Motor type |
Metal Gearmotor |
|
Frame size |
90mm |
|
Rated Revolution |
1350rpm 1550rpm 50Hz 60Hz |
|
Ratio |
3 4 5 6 7.5 10 12.5 15 20 25 30 36 40 50 75 90 100 120 150 180 200 250 300 500 |
|
Output power |
60W (other power is also available) |
|
Voltage type |
Single Phase 110V 220V 230V… |
|
Accessories |
Brake/ Connector/ Terminal box/ Capacitor/ Controller… |
|
Gearbox type |
Parallel shaft metal gearmotor |
Why Do You Choose Our Metal Gearmotor?
|
|
Hollow design, built-in fan radiator
● Reduce the motor temperature ● Ensure the high efficiency of the motor ● Prolong the service life of the motor |
|
Speed controller
● It helps you adjust speed easily ● High precision, wide speed range
|
|
|
Ball bearing on each shaft side
● High efficiency ● Improved the service life ● Reduce noise and bearing the burden, and not easy to be hot. |
|
|
|
High-temperature resistant copper coil
● 100% pure copper coil high temperature enameled coil. ● Insulation class F, ensure that the motor is stable, durable, efficient, and safe.
|
|
Hard Gear
● High hardness, low noise ● High precision and long life
|
|
Daily Check & Maintenance:
1.Keep clear of the motor and all rotating parts during operation. In the event of any entanglement or injury, immediately cut off the power supply and address the situation without delay.
2.Motors equipped with a thermal protector will automatically shut off when an abnormal temperature is detected. Once the motor cools down to the preset threshold, it will resume operation automatically. Note: This auto-recovery function applies only when the motor has not been damaged.
Hot Tags: metal gearmotor, China, suppliers, manufacturers, factory, wholesale, price
Previous
Induction Gear MotorNext
Reduction MotorYou Might Also Like
Send Inquiry