Hard tooth surface reducer is also called four series reducer, which are R series helical gear hard tooth surface reducer, F series parallel axis helical gear hard tooth surface reducer, K series helical gear helix cone gear hard tooth surface reducer, S series helical gear worm gear hard tooth surface reducer. Customers can choose different series of hard tooth surface reducer according to their own equipment requirements. The standard series of hard tooth surface reducer is suitable for the transmission and deceleration devices in various industrial machinery and equipment such as metallurgy, mining, cement, construction, chemical industry, food, sewage treatment, metal processing equipment, papermaking, conveying equipment and various production lines.
It can be said that almost all industrial machinery equipment, can choose hard tooth surface reducer as a transmission device and reduction device. This is not comparable to any other type of reducer. Then why the application field of hard tooth surface reducer is so wide? The reasons are as follows:
There are altogether 4 series of hard tooth surface reducer, and there are 4 different installation methods in each series, totaling 16 installation methods, which can meet the different installation requirements of different industrial machinery and equipment.
The gear of the reducer with hard tooth surface is made by multiple quenching process, and its hardness can reach 58-62HRC, which is 40HRC higher than that of the reducer with soft tooth surface. Gears can withstand greater torque and load with impact.
Due to the adoption of gear reduction, it has the characteristics of high transmission efficiency, low noise and good bearing capacity, which can be matched with a higher power motor. The maximum power can be used to 200KW, and it can be used in mines, cement, construction and other large industrial machinery and equipment.
Safety factor of the specific requirements, such as normal use environment normal length, 1.0 1.5 safety factor is commonly used in machine of decelerate of hard tooth flank of the can. If you need to use under harsh environment (much dust, pollution) or bearing load impact large, need large axial load, when using long, more than 20 hours a day, you will need to safety factor above 2.0, on the part of the special large mechanical equipment used will need to reach more than 3.0.
