Reduced motor for the normal operation of the gear reducer plays a very important role, it provides power for the operation of the gear reducer, which can be said to be the heart of the gear reducer. The adaptive motor drives the gear reducer to work when it is rotating, but the speed of the motor is limited by a certain limit. If the limit is exceeded, it will bring certain damage to the bearing of the gear reducer. Gear reducer with motor input maximum speed, generally controlled at 2000 RPM, too high speed for bearing seal tolerance is a test, for a long time there may be oil seepage phenomenon. Let me give you a detailed introduction:
1. because the rotary gear reducer rotary support mainly depends on the two bearings on the support, the increase of the distance between the two bearings, can increase the rotary speed reducer stability and bearing capacity. The round nut is used to adjust the axial clearance between two bearings, which is convenient and reliable. More to ensure the normal operation of the rotary gear reducer;
2. Parameterized rapid modeling of gear reducer transmission. For parts with the same or similar shape and serialized products, a set of parameters can be used to represent their structural dimensions and properties.
3. for gear speed reducer, through the parameterized modeling, users input or modify some basic parameters of gear, such as the number of teeth on the gear speed reducer, modulus, pressure Angle and the tooth width, etc.), the software system can automatically generate a three-dimensional geometric model of a certain type of gear, or rebuild geometry model, in order to improve design efficiency.
