The servo motor reducer is an indispensable part of industrial production equipment. Only the correct installation, use, and maintenance can ensure the normal operation of the machine. When installing the reducer, please use the correct method.
1. Confirm that the motor and the reducer are intact before installation, and strictly check whether the size of each portion connected to the motor and the speed reducer is matched, here is the positioning boss, the input shaft, and the reducer groove, etc., and cooperate.
Before installation, the rust-proof oil of the motor input shaft, the positioning boss, and the speed reducer is wiped with gasoline or zinc sodium. Its purpose is to ensure the tightness of the connection and the flexibility of operation and prevent unnecessary wear. Before the motor is connected to the speed reducer, the motor shaft keyway should be vertical.
In order to ensure the uniform force, the mounting bolt of any diagonal position is first rotated, but does not tighten, and then rotate the mounting bolts of the other two diagonal positions, and then tighten four mounting bolts one by one by one. Finally, the rotating force bolt.
2, the screw on the outer dust hole of the reducer is adjusted to adjust the PCS system clamping ring to the dust hole and insert the hexagonal tightening. After that, take the motor shaft key.
The third step will naturally connect the motor from the reducer. When the connection must ensure that the speed reducer output shaft is consistent with the motor input shaft, and the outer flange is parallel. As the mind is inconsistent, it will cause the motor shaft to break or reduce the reducer gear.
In addition, when installed, it is strictly forbidden to use a hammer and another hit to prevent axial force or radial force from being damaged by the bearing or gear.
Through the above introduction, everyone now has known the servo motor reducer installation method, only the correct installation servo motor reducer can ensure the normal operation of the production equipment. At present, my country's industrial level has reached the advanced level of the world, which is an inevitable trend of technology development.
