In the actual use of the occasion, the requirements for the equipment speed is different, such as the speed of the stirring shaft and the spindle speed of the lathe is not the same, then you need to use the gear reducer motor, for the speed adjustment is quite important, is also a lot of technical personnel in the equipment operation is very concerned about the problem.
In general industrial operation, the motor speed regulation is a stage regulation, which is a relatively simple and practical speed regulation method, but the practical occasion is limited, limited to those starting times and small capacity equipment.
There is also a stepless speed regulation, which can be divided into mechanical and electrical. The mechanical speed regulation is more stable, suitable for harsh environment, it is necessary to add a stepless speed regulation device on the equipment; As for the electrical debugging is through the asynchronous motor cascade speed regulation.
In addition, generally when buying a gear reduction motor, can be equipped with a control board to control the power voltage, through the change of power voltage to adjust the motor.
Finally, it should be noted that the motor speed can be divided into speed reduction and speed regulation, this is two different cases. One thing you need to know, if the motor driver is built-in, generally can not adjust the speed, if it is an external type of driver, you need to see the situation.
