4 ways to prevent high temperature reduction gear
1. reducer in a long time of operation, the oil tank and bearing temperature rise will heat the oil tank shall not exceed 35℃, the bearing temperature and exceed 45 ℃ not higher than the temperature.
2. In case of emergency, the equipment should be equipped with a cooling system, which can ensure the operation of the decelerating captain for an appropriate time. The reducer is equipped with a cooling spiral pipe, and users can connect some cooling water by themselves. When the cooling water passes through the spiral pipe, heat is transferred to the cooling water and heat is transferred out, so as to achieve the cooling effect.
3. The flow of cooling water should not be too large, but it should be able to pass through the reducer at will.
4. If the deceleration does not work for a long time, there will be the risk of icing, so the cooling water must be drained clean.
